调节阀标准汇总
发布时间：2024-05-11 点击：72
标准编号
标准中文名称
标准英文名称
gb/t4213-1992
气动调节阀
pneumatic industrial process control valves
gb10869-1989
电站调节阀技术条件
specification of control valves forfossilpowerstations
jb/t7228-1994
风量调节阀
jb/t57182-1994
气动调节阀产品质量分等
jb/t57218-19942005复审
气动调节阀可靠性要求与考核方法
hg/t3237-1989
橡胶机械用自力式压力调节阀
nf c46-503-1999
工业过程调节阀.第2-1部分:流量.在安装条件下液体流量的截面方程
industrial-process control valves. part 2-1:flowcapacity. sizing equations for fluid flowunderinstalledconditions.
nf c46-502-1993
工业过程用调节阀.第1部分:术语和概论
industrial-process control valves. part1:control valve terminologygeneral considerations.
nf c46-506-1990
工业过程用调节阀.流量.流量的特性和校正的固有系数
industrial-process control valves.flowcapacity.inherent flow characteristicsrangeability.
nf c46-525-1991
工业过程用调节阀,调节阀门的限定栅屏
industrial-process control valves.controlvalvedata sheet.
nf m62-301-4-2001
密封罩用组件.第4部分:通风和气体清洁系统如:过滤器和疏水阀的安全和调节阀门以及控制和保护装置
components for containment enclosures - part4:ventilationgas-cleaning systems such as filters,traps,safetyand regulation valves, controlprotectiondevices.
ansi/ul 144-2001
液化石油气压力调节阀的安全标准
standard for safety forpressure-regulatingvalvesfor lp gas
en iso 5135-1998
声学 在混响室中测定空调终端设备、空调终端单元、阻尼器和调节阀门的噪声功率级
acoustics - determination of sound powerlevelsofnoise from air-terminal devices, air-terminal units,dampersandvalves by measurement in a reverberation roomiso5135:1997
en 88/pra2-2001
入口压力200毫巴以下的燃气器具的压力调节阀 修改a2
pressure governors for gas appliancesforinletpressures up to 200 mbar; amendment pra2
pren 14129-2001
液化石油汽（lgp）罐压力调节阀
pressure relief valves for lpg tanks
en 88-1991+a1-1996
入口压力200毫巴以下的燃气器具的压力调节阀
pressure governors for gas appliancesforinletpressures up to 200 mbar
din v 19259-2-1999
设备文献.调节阀用带分类示意图的数据类型
documentation of devices - standarddataelementtypes with associated classification for valves
din en 60534-6-1-1998
工业流程控制阀.第6部分:调节阀门驱动的位置调节器固定用安装细节.第1节:行程驱动上位置调节器的安装
industrial-process control valves -part6:mounting details for attachment of positioners to controlvalves-section 1: postioner mounting on linearactuatorsiec60534-6-1:1997; german version en60534-6-1:1997
din 3163-1974
公称压力25的冷却剂循环直通调节阀
control through valves forrefrigerantcircuits,nominal pressure 25 bar
din 32730-1993
取暖装置中水和蒸气用具有安全功能的调节阀.安全技术要求和检验
valves with a safety function for waterandsteamin heating systems; safety requirementstesting
din 58600-2003
呼吸保护器.德国消防队用自调需氧量氧气调节阀与独立开路压缩空气呼吸器面罩之间的插塞连接
respiratory protective devices-plug-inconnection between lung governed demand valve andfacepieceforself-contained open-circuit compressed air breathingapparatusforuse by german fire brigade
ul 144-1999
液化石油气调节阀
lp-gas regulators
ul 17-1994
燃油设备用通风孔或烟囱连接器调节阀门
vent or chimney connector dampersforoil-firedappliances
jis b8387-2000
液压动力.四孔调节阀门和四孔方向控制阀门.02,03,05尺寸.夹持尺寸
hydraulic fluid power -- four-portmodularstackvalvesfour-port directional control valves, sizes02, 03and05 -- clamping dimensions
ieee 1189-1996
固定设备用调节阀铅酸vrla蓄电池的选择指南
guide for se-lection ofvalve-regulatedlead-acidvrla batteries forstationaryapplications
气动电动调节阀结构图
电动圆形插板阀的主要性能参数
气动陶瓷单闸板闸阀Z643TC气动单板进出料阀的适用范围
D71XN铝手柄尼龙板对夹式蝶阀技术特点分解
宝德2012型气动截止阀的伺服控制方法
SCZ673H/F气动穿透式刀形插板阀的优点和功能说明
J941H电动截止阀结构特点
对卫生级快装安全阀的基本技术要求
标准中文名称
标准英文名称
gb/t4213-1992
气动调节阀
pneumatic industrial process control valves
gb10869-1989
电站调节阀技术条件
specification of control valves forfossilpowerstations
jb/t7228-1994
风量调节阀
jb/t57182-1994
气动调节阀产品质量分等
jb/t57218-19942005复审
气动调节阀可靠性要求与考核方法
hg/t3237-1989
橡胶机械用自力式压力调节阀
nf c46-503-1999
工业过程调节阀.第2-1部分:流量.在安装条件下液体流量的截面方程
industrial-process control valves. part 2-1:flowcapacity. sizing equations for fluid flowunderinstalledconditions.
nf c46-502-1993
工业过程用调节阀.第1部分:术语和概论
industrial-process control valves. part1:control valve terminologygeneral considerations.
nf c46-506-1990
工业过程用调节阀.流量.流量的特性和校正的固有系数
industrial-process control valves.flowcapacity.inherent flow characteristicsrangeability.
nf c46-525-1991
工业过程用调节阀,调节阀门的限定栅屏
industrial-process control valves.controlvalvedata sheet.
nf m62-301-4-2001
密封罩用组件.第4部分:通风和气体清洁系统如:过滤器和疏水阀的安全和调节阀门以及控制和保护装置
components for containment enclosures - part4:ventilationgas-cleaning systems such as filters,traps,safetyand regulation valves, controlprotectiondevices.
ansi/ul 144-2001
液化石油气压力调节阀的安全标准
standard for safety forpressure-regulatingvalvesfor lp gas
en iso 5135-1998
声学 在混响室中测定空调终端设备、空调终端单元、阻尼器和调节阀门的噪声功率级
acoustics - determination of sound powerlevelsofnoise from air-terminal devices, air-terminal units,dampersandvalves by measurement in a reverberation roomiso5135:1997
en 88/pra2-2001
入口压力200毫巴以下的燃气器具的压力调节阀 修改a2
pressure governors for gas appliancesforinletpressures up to 200 mbar; amendment pra2
pren 14129-2001
液化石油汽（lgp）罐压力调节阀
pressure relief valves for lpg tanks
en 88-1991+a1-1996
入口压力200毫巴以下的燃气器具的压力调节阀
pressure governors for gas appliancesforinletpressures up to 200 mbar
din v 19259-2-1999
设备文献.调节阀用带分类示意图的数据类型
documentation of devices - standarddataelementtypes with associated classification for valves
din en 60534-6-1-1998
工业流程控制阀.第6部分:调节阀门驱动的位置调节器固定用安装细节.第1节:行程驱动上位置调节器的安装
industrial-process control valves -part6:mounting details for attachment of positioners to controlvalves-section 1: postioner mounting on linearactuatorsiec60534-6-1:1997; german version en60534-6-1:1997
din 3163-1974
公称压力25的冷却剂循环直通调节阀
control through valves forrefrigerantcircuits,nominal pressure 25 bar
din 32730-1993
取暖装置中水和蒸气用具有安全功能的调节阀.安全技术要求和检验
valves with a safety function for waterandsteamin heating systems; safety requirementstesting
din 58600-2003
呼吸保护器.德国消防队用自调需氧量氧气调节阀与独立开路压缩空气呼吸器面罩之间的插塞连接
respiratory protective devices-plug-inconnection between lung governed demand valve andfacepieceforself-contained open-circuit compressed air breathingapparatusforuse by german fire brigade
ul 144-1999
液化石油气调节阀
lp-gas regulators
ul 17-1994
燃油设备用通风孔或烟囱连接器调节阀门
vent or chimney connector dampersforoil-firedappliances
jis b8387-2000
液压动力.四孔调节阀门和四孔方向控制阀门.02,03,05尺寸.夹持尺寸
hydraulic fluid power -- four-portmodularstackvalvesfour-port directional control valves, sizes02, 03and05 -- clamping dimensions
ieee 1189-1996
固定设备用调节阀铅酸vrla蓄电池的选择指南
guide for se-lection ofvalve-regulatedlead-acidvrla batteries forstationaryapplications
气动电动调节阀结构图
电动圆形插板阀的主要性能参数
气动陶瓷单闸板闸阀Z643TC气动单板进出料阀的适用范围
D71XN铝手柄尼龙板对夹式蝶阀技术特点分解
宝德2012型气动截止阀的伺服控制方法
SCZ673H/F气动穿透式刀形插板阀的优点和功能说明
J941H电动截止阀结构特点
对卫生级快装安全阀的基本技术要求